Low Pressure 3/8 inch BSP (M) - 1/4 inch BSP (F) 1200mm | Companion

Model: LP1200

This Companion low pressure gas hose runs 1200mm between a 3/8 inch BSP male fitting and a 1/4 inch BSP female fitting. It’s a simple way to replace a worn hose or complete a low pressure gas connection when your setup calls for exactly these two fittings.

Companion 1200mm low pressure gas hose with 3/8 inch BSP male and 1/4 inch BSP female fittings

Suitable For:

  • Low pressure gas connections only
  • Setups that need a 3/8 inch BSP male fitting at one end and a 1/4 inch BSP female fitting at the other
  • Replacing a damaged or worn hose with the same fittings and length
  • Runs where 1200mm of hose gives you the reach you need

Why Customers Choose This Gas Hose

  • Clearly specified fittings, so you know exactly what it connects to
  • Rated for low pressure gas use
  • 1200mm length gives you room to position your gear
  • Direct BSP to BSP connection with no extra adaptor needed
  • Dispatched from our Melbourne warehouse
  • Backed by our 60-day change of mind returns

Ideal if you already know the fittings you need and want a straightforward, correctly matched replacement.

 Low Pressure Gas Hose Fittings Explained

Gas fittings only seal properly when the thread type, size and gender all match. Matching both ends is the most important step when choosing a low pressure gas hose, so check your setup before you order and this one will drop straight in.

  • 3/8 inch BSP male fitting: connects to a matching 3/8 inch BSP female fitting.
  • 1/4 inch BSP female fitting: connects to a matching 1/4 inch BSP male fitting.
  • Low pressure rating: made for the low pressure side of a gas system, where the pressure has already been reduced by a regulator.

 Length and Setup

A hose that’s too short ends up pulling on its fittings. At 1200mm, this one gives you reach between connection points without running tight, which helps keep the joints sitting properly.

  • 1200mm length: room to position your gear without the hose straining either connection.
  • Single straight run: one hose between the two fittings, with no joiners or adaptors in between.

 Specifications

Feature

Specification

Fitting (end 1)

3/8 inch BSP male

Fitting (end 2)

1/4 inch BSP female

Pressure rating

Low pressure

Length

1200mm

 Care and Maintenance

Gas hoses deserve a quick check before every use, and especially at the start of each barbecue season.

  • Turn off the gas at the source before connecting or disconnecting the hose.
  • Check the hose for cracks, cuts, kinks or perishing before each use.
  • After connecting, brush soapy water over each joint and watch for bubbles, which indicate a leak.
  • Replace the hose if it shows any damage. Never try to repair a gas hose.
  • If you’re unsure about any gas connection, have it checked by a licensed gas fitter.

 Warranty and Returns

 Frequently Asked Questions

What fittings does this hose have?

A 3/8 inch BSP male fitting at one end and a 1/4 inch BSP female fitting at the other.

Can I use this hose on the high pressure side of a gas system?

No. It’s a low pressure hose, so it’s only for use where a regulator has already reduced the gas pressure.

How long is the hose?

The hose is 1200mm long.

Will this hose fit my appliance?

It will connect wherever your setup has a 3/8 inch BSP female and a 1/4 inch BSP male connection to join. If you’re not sure, call our team on 1300 002 771 with your appliance details and we’ll help you check.

How do I check for leaks after fitting it?

With the gas turned on and the appliance off, brush soapy water over each joint. Bubbles mean gas is escaping, so turn the gas off and tighten or reseat the fitting before trying again.

 Bring the Fire to Your Backyard

Get your gas connection sorted with the Companion Low Pressure 3/8 inch BSP (M) - 1/4 inch BSP (F) 1200mm hose. We ship fast Australia-wide, and hassle-free 60-day returns mean you can order with confidence and get back to cooking sooner.

 Still Not Convinced?

We invite our customers to review our products and services regularly, and are very happy to say our feedback scores are excellent across multiple platforms.

 Want to Know More About Who You’re Buying From?

Read more about us and meet our crazy, mad team of barbecuers who love nothing more than sharing their BBQ knowledge and helping customers just like you become the ultimate backyard BBQ hero.

SKU LP1200
Barcode # 9317200007571
Brand Companion
Shipping Weight 1.1000kg
Shipping Width 0.150m
Shipping Height 0.100m
Shipping Length 0.300m
Shipping Cubic 0.004500000m3
Type BBQ Seasoning

Warranty & Returns

Warranty – Built to last, backed with confidence, see our warranty details here.

60 Day Money back Guarantee – Don’t love it? Return it unused for a full refund.

We want you to love your BBQ gear. If you don’t, simply send the unused item back within 60 days and we’ll happily arrange a refund or exchange. More details here: Refund Policy

Contact Us

Have a question about our products or policies? Call, text, or email us anytime — we’re here to help and will do our best to get you sorted quickly.

Showroom Address: 59 Brunel Road, Seaford VIC, 3198

No reviews yet — be the first to share your experience.

Write a Review

DON'T FORGET THESE

More From This Category