Food Probe Thermistor | Fireboard

Model: SF311T

The Fireboard SF311T is a replacement FireBoard food probe with a 100K thermistor sensor and a sharp, pointed tip that slides easily into meat and other food for accurate internal temperature readings. Plug it into a spare channel on a compatible FireBoard thermometer to track one more cut on a long cook, or swap out a worn probe without buying a whole new kit.

 Suitable For:

• Checking the internal temperature of meat, poultry, seafood and other food
• Adding another food channel to a compatible FireBoard thermometer
• Replacing a damaged or worn FireBoard thermistor food probe
• FireBoard (FBX11), FireBoard 2 (FBX2) and FireBoard 2 Drive (FBX2D) thermometers

 Why BBQ Fans Choose This Probe

• Sharp, pointed tip slides easily into meat and food
• 100K thermistor sensor for accurate readings
• Reads temperatures from -18 to 300°C
• 1.83 m cable reaches from the cooker to your FireBoard
• 90° bend keeps the cable running neatly away from the food
• Slim 4 mm probe diameter
• Works on FireBoard channels set to 100K thermistor, the default setting

A simple, reliable way for FireBoard owners to get more probes into the meat, or to replace one that has done its time.

 Accurate Temperatures with a FireBoard Food Probe

Knowing exactly what is happening inside the meat takes the guesswork out of every cook. This probe uses the same 100K thermistor sensor type that FireBoard thermometers read by default, so it is ready to go as soon as it is plugged in.

• 100K thermistor sensor: matches the default probe setting on FireBoard channels, so there is nothing to reconfigure for most setups.
• Temperature range of -18 to 300°C: covers chilled food straight from the fridge right through to hot cooks on the BBQ.
• Sharp, pointed tip: pierces meat cleanly, so you can set the sensor in the thickest part of the cut.

 Easy Setup on the Cooker

A good probe should be easy to place and easy to route. Each FireBoard food probe is built with a long cable and a right-angle bend, so it sits in the food while the cable runs out to your thermometer.

• 1.83 m (6 ft) cable: reaches from inside the cooker to a FireBoard sitting outside it.
• 90° bend: lets the probe stay in the meat while the cable runs away at a right angle for neater routing.
• 2.5 mm audio jack connector: plugs into the standard probe ports on compatible FireBoard thermometers.
• Mix and match: FireBoard food and ambient probes use identical plugs and sensors, so they can run side by side on the same unit.

 Inclusions: 

 Cleaning & Maintenance

A little care after each cook keeps the probe and cable in good working order.

• Allow the probe to cool before cleaning.
• Wipe the probe and cable with a soapy cloth and warm water.
• Do not submerge the probe or cable in water, or put them in the dishwasher.
• Avoid pulling or kinking the cable.

 Optional Accessories/Replacement Parts

Pair this probe with an ambient probe to track the cooker temperature alongside your meat on the same FireBoard.

• Ambient Temperature Probe | Fireboard

 Warranty & Build Quality

• Covered by the BBQ Spit Rotisseries warranty policy.
• Genuine FireBoard replacement probe, model SF311T.
• Following the cleaning steps above helps keep the probe and cable in good condition.

 Frequently Asked Questions

Which FireBoard thermometers does this probe work with?

It suits FireBoard thermometers that read 100K thermistor probes, including the FireBoard (FBX11), FireBoard 2 (FBX2) and FireBoard 2 Drive (FBX2D). The FireBoard 2 Pro (FBX2K) uses Type K thermocouple probes, so this probe is not suited to it.

Do I need to change any settings in the FireBoard app?

FireBoard channels are set to 100K thermistor by default, so the probe reads straight away. If a channel has been changed to another probe type, set it back to 100K thermistor in the app.

Can the probe go in the dishwasher?

No. Wipe it clean with a soapy cloth and warm water, and keep the probe and cable out of the dishwasher and out of standing water.

Can I use it in a deep fryer?

FireBoard states its probes can be used in deep-fryer oil. Keep within the probe range of -18 to 300°C.

Can I run food and ambient probes on the same FireBoard?

Yes. FireBoard food and ambient probes share identical plugs and sensors, so you can mix and match them across channels.

 Bring the Fire to Your Backyard

Get more out of your FireBoard with the Food Probe Thermistor and keep a close eye on every cut you cook. We offer fast Australia-wide shipping and hassle-free 60-day returns, so you can order with confidence and get back to the barbecue.

 Still Not Convinced?

We invite our customers to review our products and services regularly, and are very happy to say our feedback scores are excellent across multiple platforms.

• Trustpilot Review
• Google Review
• Facebook Review

 Want to Know More About Who You're Buying From?

Read more about us and meet our crazy, mad team of barbecuers who love nothing more than sharing their BBQ knowledge and helping customers just like you become the ultimate backyard BBQ hero.