Enquire & Order by Phone: 1300 002 771

Tempmaster Pro | Automatic Smoker Temperature Control

Choose from 3 Different Adaptors

More info.

Make 4 payments of $61.25 over 8 weeks and get it now!

The Flaming Coals Tempmaster Pro | Automatic Smoker Temperature Control unit is the ideal add-on to automate you pit temperature and take cooking in your smoker to the next level of control.

Fitting TEMPMP

Recommended Extras

Tempmaster Pro | Automatic Smoker Temperature Control


The Flaming Coals Tempmaster Pro | Automatic Smoker Temperature Control unit is the ideal add-on to take cooking in your smoker to the next level of control. Simply enter your desired cooking temperature using the control unit, and the included probe monitors the ambient temperature in your smoker - adjusting the fan speed to ensure the right amount of air is reaching the fire to maintain your pre-selected temperature. All components of the Flaming Coals Tempmaster Pro run on a single 240v power connection and can also operate on 12v supply (leads not included).

One nifty little feature of the Tempmaster Pro is the 3 stage fan speed control. You don't want the fan working at 100% speed when you reach your desired temperate as this will create temperature spikes in your cooking. You want the fan to slow down when you are close to your set temperature to eliminate a spike. This can all be adjusted in the settings.



  • Easy 2 button control unit - Simply push up or down to set your desired cooking temperature 
  • Illuminated red temperature display for easy reading
  • Extruded aluminium case for the control unit - Fire and plastic don't go well together
  • Solid stainless steel fan housing - once again, fire and plastic don't go well together. 
  • High quality Sennheiser gold temperature probe connection to give more accurate measurements
  • Splash resistant high temperature probe and with a 2 meter long cable so you can spritz your meat as much as you want
  • 240v power supply
  • The unit can be calibrated to show Fahrenheit or celsius
  • 3 stage fan speed control so you can adjust the fan speed to suit your needs
  • Calibratable thermometer so you can fine tune your temperature display to suit your smoker.
  • Adapters available to suit a variety of BBQs and smokers



  • To set the desired temperature simply press + or - buttons
  • To enter the advance settings hold down the + and - buttons together for 3 seconds. To cycle the settings menu, release the 2 buttons and quickly press them again for 3 seconds
  • All changes are automatically saved


Advance settings are:

  • FC = Press + or - to cycle between Fahrenheit or celsius 
  • PD = Adjust/calibrate probe display temperature. Press + to increase the display temperature and - to decrease the display temperature
  • Hi = Adjust the fan speed as a percentage when the temperature reaches 80 - 95% of your set target temperature. So, if you set your desired pit temperature to be 200°F and you set the Hi number to 75 this means that when the pit reaches 160°F (80% of 200°) the fan will slow down to 75% of its maximum speed until the pit temperature reaches 190°F (95% of 200°). After this, the control unit goes to the Lo fan settings.
  • Lo = Adjust the fan speed as a percentage when the temperature reaches 95 - 100% of your set target temperature



  • Standard:

    • Tempmaster control unit
    • Fan with stainless steel housing and 2 brass nuts - 3/4 inch BSP screw-in thread, Just drill a hole in your smoker and attach this fan 
    • 2-meter long temperature probe
    • Power Transformer
    • Suitable for use with the Slow n Sear Kettle BBQ


  • Universal Adapter:

    • 110mm diameter Universal Adapter that suits bullet smokers, kettles, Flaming coals offset smoker and many other smokers
    • Tempmaster control unit
    • Fan with stainless steel housing and 2 brass nuts
    • 2-meter long temperature probe
    • Power Transformer


  • BSP Adapter:​

    • BSP Adapter that  suits the Flaming Coals Gravity Feed Smoker and other smokers with a female 2 inch BSP fitting
    • Tempmaster control unit
    • Fan with stainless steel housing and 2 brass nuts
    • 2-meter long temperature probe 
    • Power Transformer


Read A Raving Review on the Flaming Coals Tempmaster Pro

Note: while this temperature controller works brilliantly on gravity feed smokers, bullet smokers, kettles and offset smokers, you may need a larger fan on certain models of Reverse Flow Smokers





Model # TEMPMP
Barcode # 9348676002593
Brand Flaming Coals
Shipping Weight 0.6500kg
Shipping Width 0.160m
Shipping Height 0.080m
Shipping Length 0.160m
Shipping Cubic 0.002048000m3
Type Smoker Accessory

While running the risk of sounding like an early 2

By: on 8 January 2020
With my beloved 2 nd son “FC Offset”, I’m finally at the point where everything I cook simply comes out perfect. However, it does require an amount of tendering love that can only be served best with a cold frosty beverage. Now that we’ve entered the season of mad rush and constant loss of spare time, my love affair with my offset needs to take a backseat… “But I’m on holidays, I’m meant to have more time!”… Enter the FC Temp Controller. Install was a breeze, very self-explanatory and similar to other controllers, what is unique is the heat resistant steel construction, other controllers are mostly plastic, and when attaching to a firebox, the last thing you want is melted noxious smoke silently ruining your expensive Waygu brisket. Once the controller was on, all vents shut and flute at 1cm, I watched and waited. True to the description, it maintained an amazing 2-4-degree temperature consistency, at this point, can I go to the pub? I waited another 2 hours, added some wood however, it was still burning at optimal efficiency I’ve only been able to achieve by meticulous study of my cooker over the years. At this point I add the wood anyway. I watched to see how the FC TC could handle me not letting it all catch before closing the firebox. With a whirr of excitement, she detected the temperature drop and got to work. Thin blue smoke began to whistle through my chamber in convectional glory. As the wood caught, I waited, the level of white thin smoke is borderline “fine print”, so subtle the thought of what was happening to my short ribs was titillating. After some time enjoying libations at my local establishment, I returned to find my new heavenly combination of Offset & FC Temp Controller, staring at me, with perfectly combusted, beautiful glistening coal. “No need to add more, we’ve got this” Is how I imagined the new couple would respond, proud and happy to help. Worth every cent. TL;DR – It works, if you’ve ever wanted a bit more time, this will deliver. Cost Vs Reward? Great Value! Joel Blucher

Sleep Like A Baby

By: on 22 December 2019
Flaming Coals Tempmaster Pro. Full disclosure - I am the General Manager of BBQ Spit Rotisseries, however don't let that take away from the honesty of the review. I have been using the Flaming Coals Tempmaster Pro on a gravity feed smoker for over 1 year. During that time, I have done at least 15-20 overnight cooks and not gotten up in the middle of the night to check the smoker once. My general routine is to fire up the smoker, dial in the Tempmaster Pro and walk away at around 10pm. I don't get back up and check the smoker until 5am when it's time to wrap. For the first couple of times I used it, I always had an EZTemp as a backup. I had minimum and maximum temps set with the EZtemp knowing that if the temps fluctuated more than the min and max I had entered, an alarm would sound and I would wake up. The alarms never went off, so I stopped using the EZTemp and now have full confidence in the Tempmaster Pro. Even when you open the smoker door to check temps, rotate the meat around etc, the temp bounces back within a minute. To my knowledge, it is the only fan controlled temperature stabiliser that has the grunt to use on an 20" (or smaller) offset smoker and a commercial gravity feed smoker.

Write a product review